About this item

• *** For Factory BMW E46 M3 Bumper Only ***
• (Not Compatible With Base / M-Tech / Aftermarket M3 Style Bumper)
• Fit: 01-06 E46 Factory M3 Bumper
• Material: Poly-Urethane (PU)
• Hardware: Included
• Black Unpaint Raw Finish (Sand & Primer Required Before Paint)
• 3M Double Sided Tape Required For Installation (Not Included)

Vehicle Compatibility:

2001 E46 Factory M3 Stock Bumper
2002 E46 Factory M3 Stock Bumper
2003 E46 Factory M3 Stock Bumper
2004 E46 Factory M3 Stock Bumper
2005 E46 Factory M3 Stock Bumper
2006 E46 Factory M3 Stock Bumper

1. Make sure you have factory stock bumper before purchase, the lip is not compatible with aftermarket bumper.

2. Professional paint job & installation is highly recommended, sand and primer is required before paint. Please test fit all items before painting and/or installation; products painted and/or damaged through installation will not be refundable.

For installation: Make sure your bumper is attached to your vehicle when install the lip. The lip will not fit if the bumper was removed from the vehicle.
(Note: The bumper needs to be installed on the vehicle in order for the front lip to fit. It was clearly mentioned in the general installation guide. When the bumper was not installed on the vehicle, it was not fully stretched, thats why the front lip will be few inches short because the front lip was molded on the original bumper that was installed on the vehicle.)