1 7

gt-speed

[GT-Speed] OE Style PU Front Bumper Lip, Compatible With 1999-2004 Ford Mustang Base GT Factory Bumper Only

[GT-Speed] OE Style PU Front Bumper Lip, Compatible With 1999-2004 Ford Mustang Base GT Factory Bumper Only

$61.99 USD
$61.99 USD
Sale Sold out
Shipping calculated at checkout.
  • (Not Compatible With SVT Cobra Bumper)
  • Compatibility: 99-04 Ford Mustang Factory Bumper
  • Fit: Our lip kit will not compatible with aftermarket bumper, please make sure you have correct year factory bumper.
  • Note: Factory front lip / front spoiler (If present) will need to be removed prior to installing this lip kit.
  • Style: OE
  • Material: Polyurethane (PU)
  • Package: Including 1 x front bumper lip
  • Self-Tapping Screws: Included
  • 3M Double Side Tape: Not included
  • Installation Guide: General installation guide is included


    Prep-Work before the installation:

    Drilling and professional installation is required.

    Test fit all items before painting and/or installation

    Requires automotive adhesive (3M double side tape are not included) for installation.

    Lip kit is required to sanded down before applying 3M double-side tape, or it will fall off.

    Professional paint job is required. Sand and Primer is required prior painting, or the paint will not stick.

    Make sure your bumper is attached to your vehicle when install the lip. The lip will not fit if the bumper was removed from the vehicle.

    Note: The bumper needs to be installed on the vehicle in order for the front lip to fit. It was clearly mentioned in the general installation guide. When the bumper was not installed on the vehicle, it was not fully stretched, thats why the front lip will be few inches short because the front lip was molded on the original bumper that was installed on the vehicle.


    Lip Kit Installation:

    Please do the prep-work before apply 3M Double Side tape, sand and clean the inner side of the lip with alcohol pad.

    Apply 3M Double-Sided tape (Not included) on all the edge, so theres no gap between the lip and bumper.

    Use heat gun to adjust the fitment if needed. When you heat up the lip with heat gun, the material will become soft and easy to adjust to any angles, it helps the lip to stick to the bumper easier, so no gap between the lip kit and bumper.

    Note: Use the heat gun to heat up the lip from the inner surface, and dont heat up same spot for too long or it will damaged the surface of the lip.

    Apply the screws that comes with and bolt them onto both end of the bumper.


    Bumper Compatibility:

    1999 Mustang Factory Bumper (Not Compatible With Cobra Bumper)
    2000 Mustang Factory Bumper (Not Compatible With Cobra Bumper)
    2001 Mustang Factory Bumper (Not Compatible With Cobra Bumper)
    2002 Mustang Factory Bumper (Not Compatible With Cobra Bumper)
    2003 Mustang Factory Bumper (Not Compatible With Cobra Bumper)
    2004 Mustang Factory Bumper (Not Compatible With Cobra Bumper)

Materials

Shipping & Returns

Dimensions

Care Instructions

View full details

Image with text

Pair text with an image to focus on your chosen product, collection, or blog post. Add details on availability, style, or even provide a review.

  • Free Shipping

    Pair text with an image to focus on your chosen product, collection, or blog post. Add details on availability, style, or even provide a review.

  • Hassle-Free Exchanges

    Pair text with an image to focus on your chosen product, collection, or blog post. Add details on availability, style, or even provide a review.